Forum Post: RE: LM27313: Marking
Hi Jack, I don't have LM27313 at hands, so I checked the marking of LM2731(the same family with LM27313). The marking picture is shown below. It also looks "crooked". So I believe the marking you...
View ArticleForum Post: RE: TLA2518: Lack of Channel Data when Appended
Hi Joel, I'm pleased to announce the new board has resolved the issue. Thanks for all your help
View ArticleForum Post: AFE58JD48: Request for Data Manuals and Clarification on Module...
Part Number: AFE58JD48 Other Parts Discussed in Thread: TSW14J50EVM , Tool/software: I'm planning to develop an ultrasonic data acquisition card using your company's AFE58JD48 chip. After conducting...
View ArticleForum Post: RE: ADS8341: Malfunctioning issue after power-on
Hi Tom-san, After power-on, the ADS8341EB can work normally regardless of the BUSY status, by following the initial setup procedure below. However, even though /CS is "High", why does BUSY keep "Low"...
View ArticleForum Post: ADS1298: Trouble with SPI communication
Other Parts Discussed in Thread: ADS1298 Tool/software: Dear all, I am having issues communication with my ADS1298 device via SPI with my adafruit ESP32 Feather V2. I have followed all the debug steps...
View ArticleForum Post: ADS7138: Driver support for LINUX Kernel 5.10.
Part Number: ADS7138 Tool/software: Hello, We are planning to use ADS7138IRTET in one of our design and it gets connected to ZYNQ 7000 FPGA PS which runs on the LINUX Kernel 5.10. Is the driver...
View ArticleForum Post: LMP92066: Getting started with the programing of the IC
Part Number: LMP92066 Tool/software: Hi, I am using LMP92066 device for PA GaN and LDMOS biasing in the design. Kindly guide me to configure the device for biasing purpose.
View ArticleForum Post: RE: ADS1213: Checking support on ADS1213E part
Hi Suresh, The ADS1213E, ADS1213U, and ADS1213U/1K will be supported for the next few years. We do recommend moving over to the ADS124S08 (300mm wafer technology) or ADS1256 for future designs to...
View ArticleForum Post: RE: ADC122S021: Replacing MCP3202T-BI
Hi Joel, Compared to the ADC122S021, the ADS7230 is more expensive. If an external LDO is used to make the power supply voltage 5V, is it correct to understand that the ADC122S021 is the TI product...
View ArticleForum Post: ADS7038-Q1: OSR_DONE bit not changing
Part Number: ADS7038-Q1 Tool/software: Hello, as the issue is still present I just wanted to keep this OSR_DONE bit not changing thread active and ask if there is anything new on this topic. According...
View ArticleForum Post: ADS54J60EVM: High Speed Data Converter Pro GUI With ZCU102...
Part Number: ADS54J60EVM Other Parts Discussed in Thread: DAC37J84EVM , Tool/software: Hi Dear! I have the Xilinx ZCU102 evaluation board. I am using this FPGA board with ADS54J60EVM and DAC37J84EVM....
View ArticleForum Post: ADS127L01: Settling time and group delay
Part Number: ADS127L01 Tool/software: Hello, I am working on a system where multiple devices with ADS127L01's are using the same clock and trigger source for MCLK and START respectively. MCLK is...
View ArticleForum Post: RE: ADS54J60EVM: Need to use TSW14J10 interface board with ZCU102
Hi Erivelton, No, you won't need the TSW14J10 to interface the J60EVM to the ZCU102. Regards, Rob
View ArticleForum Post: RE: ADS54J60EVM: Reference design for ZCU102
Hi Erivelton, First, please request the TI JESD IP for a specific reference design. You can do this at the following site:...
View ArticleForum Post: RE: ADS7946: availability
Hi Mark, The best thing I can do for you at the moment is to point you to our Product Lifecycle and Longevity page:...
View ArticleForum Post: RE: ADS131M02: ADC always reads 0x8000 no matter what the input...
Hi Dheeraj, welcome to our e2e forum and thanks a lot for choosing a TI ADC. From the scope shots you showed and your explanations, you don't seem to do anything wrong at first sight. Can you try the...
View ArticleForum Post: RE: DAC37J84EVM: Need to work TSW14J10 with ZCU102.
Hi, You should be able to use the DAC37J84 EVM with ZCU102 with TI's JESD024C IP https://www.ti.com/tool/TI-JESD204-IP You may request the IP to take a look -Kang
View ArticleForum Post: RE: DAC37J84EVM: High Speed Data Converter Pro GUI With ZCU102...
Hi Castro, See reference E2E below:...
View ArticleForum Post: RE: DAC37J84EVM: TSW14J58EVM and/or TSW14J59EVM have support for...
Hi, The TSW14J58 EVM does not support the DAC37J84 EVM. I am routing your question to another team to comment on the SW and FW support from TSW14J59 side.
View ArticleForum Post: RE: DAC37J84: PSPICE-TI and ADS Keysight Analisys and Simulation...
Hello, You should be able to find the info in the tools below in the DAC37J84 webpage: www.ti.com/.../DAC37J84
View Article