Forum Post: RE: DAC82002: Suitable devices recommendation
Hi Ryker, Here's some pin-to-pin replacements for the first three devices: AD5541ARZ-REEL7 SOIC-8 (ADI) DAC8830 AD5424YRUZ-REEL7 TSSOP16 (ADI) TLC7524C AD5621BKSZ-REEL7 SC70-6 (ADI) DAC7311 I didn't...
View ArticleForum Post: RE: ADS1605: SO#356393 / ADS1605IPAPT PowerPAD oxidation
Hello Manuel, I will follow-up on this tomorrow. Do you have a picture of one of the devices that shows the oxidation? Regards, Keith Nicholas Precision ADC Applications
View ArticleForum Post: RE: DAC53204: No response on SDO in 4-Wire SPI after enabling GPO...
Hi Brian, Only enable the SDO pin. Do not enable GPIO (GPI-EN and GPO-EN should be zero). These are separate features and the GPIO enable will take priority over the SDO function. Best, Katlynne Jones
View ArticleForum Post: RE: ADS1605: SO#356393 / ADS1605IPAPT PowerPAD oxidation
Dear Keith, Thanks for the coordination. Please share once verified. Regards, Manuel
View ArticleForum Post: RE: DAC63204-Q1: Setup for simple voltage output
Hi Jessica, None of that is required for a simple voltage output. If you do want to use some of those features let me know and I can help you understand how to use those. Write 0x0400 to...
View ArticleForum Post: RE: DAC80508: Noise on all DAC pins when using SDO in...
Hello, Thanks for confirming. I can try this in the lab and see if I see the same noise. I am currently traveling for work so it'll be a few days before I can get back in the lab. Since you have these...
View ArticleForum Post: RE: ADS1299EEGFE-PDK: ADS1299EEG-FE Overheating and Not Working
Hi Ryan, Thanks for your reply. I’ve attached a high-resolution photo of the board showing the current jumper setup. For my electrode configuration, I left pins 1 to 16 on the J6 header unjumpered....
View ArticleForum Post: RE: TSC2007: x, y axis changed reaction problem
Hi, If I physically change x and y, it is properly recognized. However, the same touch panel was properly recognized on other CPU (cirrus logic EP-9312) with a built-in touch driver. So I was...
View ArticleForum Post: AMC7834: IOVDD Amplitude
Part Number: AMC7834 Tool/software: Hi team, When Address (0x17) CLAMP Configuration bit1 (DAC34-CLAMP) is set to 0, IOVDD amplitude changed significantly. In the customer's system, only DAC4 is...
View ArticleForum Post: ADC3910D125: Understanding Input Requirements for ADC3910xxx
Part Number: ADC3910D125 Tool/software: Hi! I'm thinking of using the ADC3910xxx.I noticed it has high Z input buffers. I also noticed that the analog inputs have a Vcm requirement of 1.25V....
View ArticleForum Post: DAC60508: DAC output Filter
Part Number: DAC60508 Tool/software: We are using "DAC60508" in our Design and Connected DAC outputs to ADC inputs of AM64x. Please confirm if any filtering circuit needed for DAC output signals...
View ArticleForum Post: RE: ADS1014L: LIYCJ
Hi Joachim Wuerker, But we could not find the full orderable MPN ADS1014LIYCJR in the datasheet.
View ArticleForum Post: RE: ADS125H02: Testing (of digital parts) with only DVDD possible?
Thanks! Do I interpret it correctly than I can test surrounding ICs just fine then with only a DVDD supply?
View ArticleForum Post: AFE5851: LOW_FREQUENCY_NOISE_SUPPRESSION and VGA gain.
Part Number: AFE5851 Tool/software: AFE5851 has a bit called LOW_FREQUENCY_NOISE_SUPPRESSION. What exactly does this bit do? Also, the AFE has a -6dB to +31dB VGA, however, the input stage saturates...
View ArticleForum Post: RE: ADC3422: test PRBS generated on LVDS outputs
Hi Rob, thanks for the effort. If it can be useful, I can send you binary files with data dumped from all channels simultaneously, for both the RAMP and PRBS tests. Thanks Andrea
View ArticleForum Post: DAC39RF10EVM: EVM availability
Part Number: DAC39RF10EVM Tool/software: Hello, My customer plans to purchase DAC39RF10EVM, but it is out of stock on TI.com. Around when does TI think it would get back in stock? Best regards, K.Hirano
View ArticleForum Post: RE: DAC60501: SPI communication problem
Hi Erin, thanks for your quick reply! That was the thing I missed, always the easy ones... But now it works as expected, thank you so much!
View ArticleForum Post: RE: ADC12DJ5200RFEVM: ADC GUI script for ADC12DJ5200RFEVM
Hi Chase W and Rob, Thnak you for your reply. 3.11 Open the HSDC Software and Load the FPGA Image to the TSW14J57EVM I do not see the popup to confirm the TSW board serial number in the above step....
View ArticleForum Post: AFE4400: Suggestion for Photodiode, RED LED and IR LED
Part Number: AFE4400 Tool/software: Hello TI team, I am working on an SpO₂ application using the AFE4400, which typically requires a photodiode, red LED and an IR LED. Could you please suggest...
View ArticleForum Post: ADS131M08: Input Filtering and Reference
Part Number: ADS131M08 Tool/software: My team and I are working on evaluating the ADS131M08 for future use in our products. For each differential channel negative input, we feed in the same voltage...
View Article