Forum Post: RE: cannot install driver for ADS1298 to Windows Vista....
Mr Manni -We cannot comment on the software operation on software version outside of the registered WinXP and Win7 that we use for testing.
View ArticleForum Post: RE: in AIC3204 what is the difference between Digital Volume...
Hi, Daram,Unfortunately, it sounds like your intended application is going to take a lot of external circuitry and custom enclosures to be successful. What you are trying to accomplish is extremely...
View ArticleForum Post: RE: TLV320DAC3100 SPK out a digital signal?
Hi, Yi,There could be many reasons for the poor audio quality.I'd double-check the register settings, schematic, layout, and components in series with all the audio paths. Usually one of those things...
View ArticleForum Post: RE: Why TLV320DAC3100 SPK out sounds so bad?
Hi, Yi,I replied to the thread you referenced above.-d2
View ArticleForum Post: RE: VU meter with PCM3070
Hi, Tom,AFAIK, we have never implemented a VU meter in miniDSP, but it sounds like you are on the right track.Have you been able to get this to work to your satisfaction?-d2
View ArticleForum Post: RE: Problem with PCM3070 Analog Output
Hi, no problem at all!Yes I did. I needed a Wordclock at the WCLK Pin of the PCM while powering up the device. After the PLL locked the PCM runs without Wordlock. I think it's something wrong with the...
View ArticleForum Post: RE: DSD1792A - confusing behavior with digital filter
Hi, Michael,We think you are on the right track. Please test different settings and see if you can get better performance.-d2
View ArticleForum Post: RE: TLV320ADC3101 mini DSP programming
Hi, Christian,Sorry we missed your post, but I am happy that you go it working, and more importantly, took the time to come back and tell us it was working AND tell others how you got it working so...
View ArticleForum Post: RE: Linux device drivers for...
Hi, All,I have made this a "sticky" post so it stays at the top of the forum, and I have locked it. If you have any questions, please start a new thread.-d2
View ArticleForum Post: RE: PCM5142EVM and Pure Path Studio
Hi, Hasebe-san,Sorry for the delay! Did you get this working?-d2
View ArticleForum Post: RE: New TAS5142DDV6EVM2 does not communicate with TAS3108EVM2 -...
Hi, Knud,Unfortunately, your set up uses devices that are NRND, so it is difficult to find documentation on them.I do see the TAS5142DDV6EVM2 is using the TAS5086 as the modulator on the EVM. What...
View ArticleForum Post: RE: AEC on TLV320AIC3254
Hi, Rafael,I apologize profusely, but we have stopped supporting AEC on this device.If you want to return the EVMs and get a refund, tell the eStore folks to check with me for approval.-d2
View ArticleForum Post: RE: TLV320DAC3203 - Popping noise when the device is powered off
Hi, Rob,Did Jeff's recommendation do the trick?-d2
View ArticleForum Post: RE: 9211 EVM Board SPDIF issue..........please give me a...
Hi, Ray,Is your source material copy protected? This might prevent the playback.Check TXCS2 and RXCS2 in the d/s for more info.-d2
View ArticleForum Post: RE: Huge Noise Using Digital biquad filter banks
Hi, Daram,It sounds like there is an error in your coefficients causing the biquad to be unstable.Please double check and adjust your biquad to see if the situation improves.-d2
View ArticleForum Post: RE: PCM5122EVM :Unable to Connect to Hardware
Hi, Jason,Thanks for the heads-up! We will definitely get this fixed in any new EVMs we rebuild!-d2
View ArticleForum Post: RE: LM49350 - tricky GPIO pin for I2C
Hi, Frank,I don't think the GPIO will do what you need. I was somewhat excited when I read about chip_en register bit, but what you really want is some way to program the I2C of each device. I like...
View ArticleForum Post: RE: PCM1795 How to change DSD Mode to PCM Mode
Kato-san,This is not a recommended use case. If you have to have this delay, please hold the PCM1795 in /RST during this loss of SCLK.-d2
View ArticleForum Post: RE: AIC3120: Which component should we use in order to detect the...
Hi, Kaka,Sorry for the delay. I have asked my colleague to get back to you next week.-d2
View ArticleForum Post: RE: LM49350 - looks good, but is it recommended for new products?
Hi, Frank,Unfortunately, the resources to support the LM49350 have left the company.As Dave mentions, the TLV320AIC3212 is a 100% fully supported device. Take a look and let us know what you think.-d2
View Article