Hi Saad, the ADS131M08 doesn't offer those commands. Other TI ADCs offer such commands, but not the ADS131M08. We recommend to only write registers to change the device configuration when you are in standby mode, especially when you want to change the power mode or OSR setting. But you can in principle write registers also while conversions are ongoing. You can read registers both in standby mode and when conversions are ongoing. I would recommend reading sections "8.5.1.10.7.1 Reading a Single Register" and "8.5.1.10.7.2 Reading Multiple Registers" in the datasheet. If you still have questions after reading those sections, then please reach out again. Regards, Joachim Wuerker
↧