I wanted to connect my brand new ADS4449EVM to a Kintex FPGA through the ADC-FMC adapter supplied by Ti. Imagine my chagrin to find that the EVM QSH connector has large brass alignment posts that prevent using it with the adapter board. The ADC-HSMC adapter which is newer has a QTH connector that accepts these posts. So here's the question: Will Ti offer a newer ADC-FMC adapter card that can be used with the ADS4449EVM? NOTE: the ADS4449EVM also drives a differential clock on pins into the adapter that are NOT routed to the FMC connector. Fixing the mechanical issues would require modifying board dimensions to accommodate the larger QTH connector.
thanks to anyone who responds