Part Number: ADS1232REF Tool/software: Dear, Data converters Support team . Our customers are currently using and evaluating the ADS1232REF. [Console] Viewing/setting with P command. ＜Scale mode＞…When viewed with the P command, it responds with gain=1, but cannot be changed even if it is set. When GAIN0,1 is checked with a tester, it is 3.3V, so it seems that it is actually fixed at gain=128. ＜Analysis mode＞…When viewed with the P command immediately after startup, it responds with gain=1, but when viewed again after measurement (which starts automatically), it automatically becomes gain=128. It can be set with the P command, and the setting value is retained after setting, even after measurement. 【Summary】 I think there is some rule for how Gain is set in Scale mode and Analysis mode, and I would like to know it. Best Regards, Hiroaki Yuyama
↧