Prahlad, This was the reply I got from our Xilinx contact regarding interfacing to a VC709 platform: "The HSDC pro demo does not support the transceiver used in the VC709 device. The 7 series HSDC Pro demo supports EVM’s with GTX type transceivers (kc705, zc706, vc707). The VC709 uses GTH transceivers so the firmware will be different. A customer could quite easily get this EVM to work with a TI EVM. It would be exactly the same process as doing it for any other board". The customer could use the existing firmware as a starting point, but would need to make changes regarding the transceivers. If they do not plan on using the HSDC Pro GUI, they would not need the TSW14J10EVM . Regards, Jim
↧