Hello,
thanks a lot, the new board is OK (was OK ;o( )
I did a Firmware update:
Device: TAS1020B
SW: DFUTEST.exe
Example Firmware: TAS1020-Firmware Dev Kit/TAS1020BEVM Firmware/v1.8/Application/bin/APP124
TAS1020B connected via USB to 7
PCM5102EVM-U in DFU-Mode OK (Windows Device Manager: DFUUSB.Sys TI DFU class driver)
DFUTEST.EXE: downloading APP124.BIN or App116.bin to the TAS1020B device
DFUTEST.EXE: Get State=0x06 à Get Status à GetState=0x02
DFUTEST.EXE: Reset the device - always Error
the DFUUSB.Sys TI DFU class driver device in the Windows Device Manager vanished and no further USB devices are recognized.
is there any default APP for the PCM5102EVM-U or some ready Firmware I can use?
When I am using the APP8.BIN (13.10.2003) that is included in the firmware package (TAS1020-Firmware Dev Kit\TSC2100_FW8\Headset), once the TAS1020B device update was OK, but I cant reproduce this, now there is
always an Error after DFUTEST.EXE: Reset
please Help,
David