Forum Post: RE: ADS41b29 CMOS Mode

Hi Ibrahim,

I just setup the EVM. After resetting the part I see an LVDS clock on pins 4 and 5. I then write 0xC0 to address 0x41. I'm now able to see a CMOS clock on pin 5 of the ADC. Pin 4 is held at ground. If you're using the EVM can you please try this simple test?

The jumpers are setup as such:
JP9 = 2-3
JP12 = 2-3
JP11 = 2-3

In the ADS41xx GUI, I am simply pressing the "RESET" button and then the "Output Interface" button.

Regards,
Matt Guibord