Forum Post: ADS41b29 CMOS Mode

Hi,

I'm trying to set the ADC to CMOS mode. My register settings are:

        0x03, 0x03,
        0x25, 0x50,
        0x3D, 0x80,
        0x3F, 0x1F,
        0x40, 0xFF,
        0x41, 0xC0,
        0x42, 0x08,
        0x43, 0x00,
        0x4A, 0x01

My CLK is 166.66MHz. I cannot see any CLKOUT signal on the pins 4 or 5.

My questions are:

1) Are the registers correct? Do I have to set any other register than 0x41 for CMOS? The DFS pin should be irrelevant for this setting, right?

2) Which pin is the CLKOUT in CMOS mode?